Business card slitter
Specification :
Paper size : A4 : 210*297mm/(195-212mm*297)
Name card size : 90.0*54mm
Margin : left side margin 9-12mm can be adjusted , up margin 3-10mm can be adjusted .
Life time of the blade : less than 100000times .
Cutting speed : 30pcs/minutes .
Power supply : AC220/50HZ
Power : 18W
Weight : 4.8KG
Introduction :
This kind of machine , you need to use two time to cut into name card .
No matter it’s the letter or picture name card , this machine can be done !
This machine suitable for 100g-300g paper , can not be used for pvc and plastic card .
Model: 300B. After you click the button , the green light will be on , the machine will be on . Click again ,the machine will be off !
Caution :
A , Make sure there is no any liquid in the machine , make sure no any metal thing , small wastepaper in the machine .
B , Please do not touch the knife by your hand .
C , Please put the machine in the flat desk .
D , You just can put one paper in the machine in one time .
E , If there is any smoke , big nozzle in the machine , please do not use it .
F , If any maintain , please make sure to be power off !
Manual :
The first entry port : Put the name card paper which has been printed ( A4 : 210*297mm) in the first entry port ( down entry port),move the orientation of the both margin , make sure it closed enough to the both margin , move the name card paper to the blade , use the blade sign to adjust the name card paper’s position , then leave go of your hand , it will finished cutting by itself .
Second entry port : Rotate the name card paper which has been cutted in the first port to 90degree , then put in the second entry port (up entry port), move the orientation , make sure it closed to the margin of the paper , use the blade sign to adjust the paper to the suitable position , then leave go of your hand , the machine will go by itself .
Do the cleaning .
